ZINC HULL ANODE (WELDED TYPE)
Kích thước anode (LxWxT)mm |
Kích thước lõi anode (LxWxT)mm |
Net Weight (kg) |
Gross Weight (kg) |
270x150x32 | 350x40x6 | 6.5 | 7.1 |
400x150x32 | 530x40x6 | 11.1 | 12.1 |
550x130x50 | 650x40x6 | 21.3 | 22.5 |
550x130x65 | 650x40x6 | 25.9 | 27 |
550x130x96 | 700x50x9 | 42.5 | 45.1 |
500x130x75 | 700x50x9 | 32.3 | 34.9 |
915x130x52 | 1015x40x6 | 35.9 | 36.5 |
305x152x32 | 425x30x4 | 8.1 | 8.5 |
585x142x53 | 750x38x6 | 25 | 26.3 |
ZINC HULL ANODE (BOLTED TYPE)
Kích thước anode (LxWxT)mm |
Kích thước 2 lỗ bulong Bolt to bolt ctrs |
Net Weight (kg) |
Gross Weight (kg) |
150x70x20 | 75 mm | 1.1 | 1.5 |
200x100x20 | 110mm | 2.2 | 2.5 |
200x100x30 | 110mm | 3.3 | 3.6 |
200x100x40 | 110mm | 3.9 | 4.2 |
300x150x25 | 160mm | 6.9 | 7.3 |
300x150x30 | 160mm | 7.9 | 8.3 |
300x150x40 | 160mm | 10.6 | 11 |
300x150x50 | 160mm | 13.4 | 13.8 |
300x200x40 | 160mm | 16.6 | 17 |
300x200x50 | 160mm | 20 | 20.5 |
305x76x36 | 230mm | 3.6 | 4.1 |
BỘ CÁCH ĐIỆN DÙNG CHO MẶT BÍCH
Là nhà phân phối sản phẩm Flange Insulation Gaskets Kits của 2 thương hiệu lớn trên thế giới là Flexiteck (Unitek Kingdom) và Klinger (Singapore), hàng hóa có sẵn tại kho, gồm các kích thước từ 1 inch đến 48 inch, cấp áp suất #150 và # 300
Model : E
A full-faced gasket with the same outside diameter as the flange and precision cut bolt holes the design facilitates proper alignment of the gasket during installation & foreign material is prevented from shorting the flange insulation. Available in plain face, nitrile, or neoprene face phenolic, as well as a variety of high temperature materials.
Model : F
It’s made to fit the raised face portion of the flange only. As there are no bolt holes in this type, the inside diameter of the bolt hole circle is slightly smaller than the outside diameter of the gasket, assuring an exact, automatic positioning of the gasket. Available in plain face, nitrile, or neoprene face phenolic, as well as a variety of high temperature materials.
ĐIỆN CỰC SO SÁNH LẮP CỐ ĐỊNH
Size: 1.5″ dia. x 6″ long, space-age ceramic tube with yellow protective caps.
– Lead Wire: 50′ OF #14 RHH-RHW yellow. *Add $0.29/ft. for extra lead length
– Stability: +/- 5 millivolts with 3.0 microamp load.
– Temperature Range: 32°F to 135°F ( 0°C to 57.2°C).
HỘP NỐI CÁP ĐIỆN
VINAPEMA chuyên cung cấp các hộp đấu nối cáp điện IP cao (IP55, I56, IP65, IP66) với các kích thước, terminal, điện trở, biến trở theo đặt hàng của khách hàng, vật liệu vỏ hộp: nhôm, inox 304, inox 316, inox mạ…